www.eleafworld.com is the ONLY official website of Eleaf as well as the ONLY site to verify the authenticity of the product purchased.
This site is intended for sale to adults 18 years or older. If you are not legally able to purchase tobacco products in the state where you live, please do not enter this site.
UNDER 18
18+(ENTER SITE)
Age Certification

iStick Pico

iStick Pico Kit
iStick Pico (New Colors)
Product Introduction:
The iStick Pico, just like its name, is preferable, innovative, compact and outstanding (PICO). With a compact size, you can hold it in the palm, much more convenient for usage and portability. Powered by single interchangeable 18650 cell, the iStick Pico also provides you with 75W maximum output and switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes.






iStick Pico Kit
Parameter:
Size: 45mm*23mm*70.5mm
Thread type: 510 thread
Cell type: High-rate 18650 cell
Cell type:(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-75W
Resistance range: 0.05-1.5ohm (TC modes)
Resistance range: 0.1-3.5ohm (VW/Bypass mode)
Temperature range: 100-315℃/200-600℉ (TC modes)
Color: full black, brushed silver, hot pink, black, grey
Color: silver, white, jet black bronze, white bronze
Color: dazzling, red crackle, brushed black silver
Color: brushed gunmetal, wood grain
Standard configuration:
1×iStick Pico (without cell)       
1×USB Cable    1×User Manual   


iStick Pico Kit
iStick Pico Kit
Tiny and Cute Appearance
With a compact size, you can hold the kit in the palm, much more convenient for usage and portability.
TC-SS and TCR Modes Available
Despite the compact size, the iStick Pico allows an intelligent but yet satisfying draw with 75W maximum output and switchable VW/Bypass/TC(Ni,Ti,SS,TCR) modes.
iStick Pico Kit
iStick Pico Kit
Interchangeable 18650 Cell
Users can carry spare cells when on the go and change the cell easily by removing the battery cap only.
510 Spring Connector
It also retains stainless steel spring loaded 510 connector for strong wear resistance and high adaptability.
iStick Pico Kit
Micro USB Port
Charging: The 18650 cell can be charged in the iStick Pico through the side USB port via 1A wall adapter or computer or charged with an external battery charger. The recommended way is to charge the cell externally as it will take less time to give the cell a full charge.
iStick Pico Kit
Firmware upgrading: The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.
iStick Pico Kit
(Previous)