www.eleafworld.com is the ONLY official website of Eleaf as well as the ONLY site to verify the authenticity of the product purchased.
This site is intended for sale to adults 18 years or older. If you are not legally able to purchase tobacco products in the state where you live, please do not enter this site.
UNDER 18
18+(ENTER SITE)
Age Certification

iStick Tria

iKuun i80 with MELO 4
iStick Tria
Product Introduction:
The iStick Tria, a new powerful mod by Eleaf, accepts triple 18650 batteries and is capable of firing up to 300W, allowing a more massive vapor production than ever. Powerful yet compact, it is quite comfortable to carry and hold for its ergonomic cubic shape design with rounded edges. A 0.91 inch screen displays all essential information clearly and has three separate battery bars revealing battery level of each battery. Having upgradeable firmware, 2A quick charge and reverse charge capabilities, this full-featured iStick Tria is a must have vaping box for cloud chasers. iKuun i80 with MELO 4
Parameter:
Size: 41mm*41mm*75mm
Weight: 122g
Output wattage: 1-300W
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Output mode: VW/TC(Ni,Ti,SS,TCR-M1,M2,M3)
Resistance range: 0.05-1.5ohm (TC modes)
Resistance range: 0.1-3.5ohm (VW mode)
Temperature range: 100-315℃/200-600℉(TC modes)
Standard configuration:
1×iStick Tria (without batteries) & 
1×QC USB cable     1×User Manuals


iStick Tria with ELLO S

Powerful Output of 300W
Powered by triple 18650 batteries, the iStick Tria is capable of outputting a maximum power of 300W, providing you with a large amount of vapor production. iStick Tria with ELLO S
iStick Tria with ELLO S
0.91-Inch Screen with Triple Battery Bars
The iStick Tria comes with a 0.91-inch screen that offers a concise and clear interface with 3 separate battery bars, allowing you to know which battery needs to be charged or exchanged.
iStick Tria with ELLO S
Stay Stylish and Modern
The overall compact profile and stylish visual appeal of the iStick Tria make this powerful vape mod stand out from others.
2A Maximum Charging Current for Quick Charge
With 2A maximum charging current, the batteries can be fully charged much more quickly.
iStick Tria with ELLO S
Battery Balancing Trickle Charge System
A battery balancing trickle charge system is utilized in the iStick Tria to bring 3 batteries to the equal level charge, which also ensures high security in charging.
iStick Tria with ELLO S
Preheat Function & Switchable Interfaces
Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. iStick Tria also has three switchable display interfaces for you to choose from: Puff interface, Second interface, and Current (amp) interface.

iStick Tria with ELLO S
iStick Tria with ELLO S
2A Maximum Charging Current for Quick Charge
With 2A maximum charging current, the batteries can be fully charged much more quickly.
iStick Tria with ELLO S
Battery Balancing Trickle Charge System
A battery balancing trickle charge system is utilized in the iStick Tria to bring 3 batteries to the equal level charge, which also ensures high security in charging.
iStick Tria with ELLO S
High Compatibility
The iStick Tria can handle tanks up to 25mm diameter without any overhang.
iStick Tria with ELLO S
Dual Circuit Protection
The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.
iStick Tria with ELLO S
Reverse Polarity Protection
Reverse polarity protection is fully achieved by the application of special battery anti reverse circuit in the circuit board.
iStick Tria with ELLO S
Reverse Charging Capability
With the Reverse Charging (RC) adapter (optional accessory), the iStick Tria will convert the 510 connection into a USB output for
power bank mode, providing power to your cell phone or other e-cig device.
iStick Tria with ELLO S
Functions of Micro USB Port
Charging: The 18650 batteries can be charged in the iStick Tria through the side USB port via wall
adapter or computer or charged with an external battery charger.
iStick Tria with ELLO S
Firmware upgrading: The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.

iStick Tria with ELLO S
Download the file below to put custom logo into your iStick Tria.
iStick Tria with ELLO S
(Next)