Eleafworld E cig
www.eleafworld.com is the ONLY official website of Eleaf as well as the ONLY site to verify the authenticity of the product purchased.
By entering this website, you certify that you are of legal age to purchase tobacco products in the state where you reside.
UNDER 21
21+(ENTER SITE)
Age Certification
WARNING: This product contains nicotine. Nicotine is an addictive chemical. Our products are restricted to adults 21+ only.

iStick Pico Mega Kit

Product Introduction:
iStick Pico Mega, an upgraded version of iStick Pico, is compatible with both 26650 and 18650 cells. It is updated with the new firmware which features a simpler interface for VW mode, a Smart mode for easy operation and a custom logo for fun. When used with newly added NotchCoilTM, the MELO III/MELO III Mini atomizer is the best match for iStick Pico Mega.
iStick Pico Mega Kit
iStick Pico Mega Kit
Parameter:
For iStick Pico Mega:

Size: 53.5mm*31.5mm*73.5mm
Thread type: 510 thread
Cell type: High-rate 18650 cell (Continuous discharge current should be above 25A)
Cell type High-rate 26650 cell (Continuous discharge current should be above 35A)
Output mode: Smart/VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Output wattage: 1-80W
Resistance range: 0.05-1.5ohm (TC modes)
Resistance range: 0.1-3.5ohm (Smart/VW/Bypass mode)
Temperature range: 100-315℃/200-600℉ (TC modes)
Color: Hot pink, black, grey, silver, white
iStick Pico Mega Kit
Parameter:
For MELO III/MELO III Mini:

Length: 65mm/55mm
Diameter: 22mm
Capacity: 4ml/2ml
Thread type: 510 thread
Material: 304 stainless steel
Color: silver

Features:

1. EC NC 0.25ohm Head: Being capable of working under high wattage, the newly added stainless steel 316L NotchCoilTM (EC NC 0.25ohm±0.05ohm Head) will give you a great vaping experience with large vapor production and good flavor.
iStick Pico Mega Kit

2. New Firmware V1.01:
The new firmware features a simpler interface for VW mode, a Smart mode for easy operation and a custom logo for fun.
iStick Pico Mega Kit

3. Interchangeable 18650 or 26650 Cell:
The iStick Pico Mega can be powered by a 26650 cell or a 18650 cell when inserted with the battery sleeve. The magnetic battery cover is for ease of changing the cell.
iStick Pico Mega Kit

4. Powerful Output and Various Modes Available:
It allows an intelligent and satisfying draw with 80W maximum output and switchable Smart/VW/Bypass/TC(Ni,Ti,SS,TCR) modes.
iStick Pico Mega Kit

5. Unique Bottom Design:
The ventilation holes at the bottom are for better heat dissipation and the adjustment buttons are located at the bottom as well.
iStick Pico Mega Kit

6. Top E-liquid Filling:  
The e-liquid can easily be refilled by removing the top cap of MELO III/MELO III Mini only.
iStick Pico Mega Kit

7. Detachable Structure:
All the parts of MELO III/MELO III Mini can be detached, bringing more convenience in maintenance.
iStick Pico Mega Kit

8. Invisible Airflow Control:
This new design of the invisible airflow control is also a plus to the fashionable appearance of MELO III/MELO III Mini.
iStick Pico Mega Kit

Micro USB Port

Charging: The recommended way is to charge the 18650 or 26650 cell externally. The cell can also be charged in the iStick Pico Mega through the side USB port via 1A wall adapter or computer.
iStick Pico Mega Kit
Firmware upgrading: The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.
iStick Pico Mega Kit
iStick Pico Mega Kit
iStick Pico Mega Kit
iStick Pico Mega Kit
iStick Pico Mega Kit
Full kit comes with:
1×iStick Pico Mega (without cell) 1×Battery Sleeve 1×MELO III/MELO III Mini Atomizer
1×EC 0.3ohm Head 1×EC 0.5ohm Head 1×EC NC 0.25ohm Head
4×Seal Ring 1×USB Cable 2×User Manual