Eleafworld E cig
www.eleafworld.com is the ONLY official website of Eleaf as well as the ONLY site to verify the authenticity of the product purchased.
By entering this website, you certify that you are of legal age to purchase tobacco products in the state where you reside.
UNDER 21
21+(ENTER SITE)
Age Certification
WARNING: This product contains nicotine. Nicotine is an addictive chemical. Our products are restricted to adults 21+ only.

iStick Pico 25 with ELLO

iStick Pico 25 with ELLO
iStick Pico 25 with ELLO
Product Introduction:
The iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance. iStick Pico 25 with ELLO
Parameter:
Size: 25.0mm*48.0mm*104.0mm
Weight: 143.2g
E-liquid capacity: 2ml
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes)
Resistance range: 0.1-3.5ohm (VW mode)
Standard configuration:
1×iStick Pico 25 (without battery)      1×ELLO Atomizer
1×HW1 Single-Cylinder 0.2ohm Head            1×HW2 Dual-Cylinder 0.3ohm Head
1×QC USB Cable     2×User Manuals      Spare Parts     


iStick Pico 25 with ELLO
Childproof Version Available
Childproof version for iStick Pico 25 with ELLO (2ml) is available for your choice. The button should be pushed in when you slide the mouthpiece back to reveal the fill port to refill.
iStick Pico 25 with ELLO
iStick Pico 25 with ELLO
Compact, Stylish and Powerful
With a compact size, the iStick Pico 25 with ELLO is very comfortable to hold and carry. Powered by single 18650 battery, it is capable of outputting a maximum power of 85W.
Big 0.91-Inch Screen with Optional Interfaces
The iStick Pico 25 features a big 0.91-inch screen that offers concise and clear interfaces. And there are three switchable interfaces for you to choose the one you're most accustomed to.
iStick Pico 25 with ELLO
iStick Pico 25 with ELLO
High Compatibility
The iStick Pico 25 can handle various
tanks up to 25mm diameter.
2A Quick Charge Capability
With a maximum charging current of 2A, the
battery in the iStick Pico 25 can be fully charged
much more quickly.
iStick Pico 25 with ELLO
iStick Pico 25 with ELLO
Replaceable 18650 Battery
The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you.
HW Coils for Big Clouds and Optimal Flavor
The iStick Pico 25 comes with the HW coils: HW1 Single-Cylinder 0.2ohm Head and HW2 Dual-Cylinder 0.3ohm Head, providing you with different vaping experience. iStick Pico 25 with ELLO

Note: All the data above was based on the tests by Eleaf factory. Only for your reference.
iStick Pico 25 with ELLO
iStick Pico 25 with ELLO
Convenient Retractable Top Fill System
To fill the ELLO tank, you just slide the drip tip back and it reveals the fill port, which is quite easy to use and works very well.
Detachable Structure for Easy Cleaning
All parts of the ELLO tank can be detached and reassembled, allowing great convenience to clean them.
iStick Pico 25 with ELLO
iStick Pico 25 with ELLO
iStick Pico 25 with ELLO
Upgradeable Firmware with Preheat Function
Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest.
Dual Circuit Protection
The circuit protection system has both software and hardware battery protections of
over-charging, over-current and over-discharging.
iStick Pico 25 with ELLO
Functions of Micro USB Port
Charging: the 18650 battery can be charged in the iStick Pico 25 through the side USB port via
wall adapter or computer or charged with an external battery charger.
iStick Pico 25 with ELLO
Firmware upgrading: the firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.

iStick Pico 25 with ELLO
Download the file below to put custom logo into your iStick Pico 25.
iStick Pico 25 with ELLO